---

Page Source for Yealink

=begin options 

write = root 

=end options 

=head2 Yealink 

Yealink L<web site|http://www.yealink.com>. 

=head3 Initial configuration. 

1. Press the OK key when the phone is idle to get the IP address of the
phone. 

2. Open the web browser on your computer, enter the IP address into the
address bar (e.g., "http://192.168.0.10" or "192.168.0.10") and press
Enter. 

3. Enter the user name (default: admin) and password (default: admin)
in the login page and click Confirm. 

Note: Please locate your computer in the same network segment of the IP
phone (192.168.0.X) to access the web user interface. Contact your
system administrator for more information. 

Network Settings: Click on Network->Basic->IPv4 Config 

You can configure the network in the following ways: 

DHCP: By default, the phone attempts to contact a DHCP server in your
network to obtain its valid network settings, e.g., IP address, subnet
mask, gateway address and DNS address. 

Static IP Address: If your phone cannot contact a DHCP server for any
reason, you need to configure IP address, subnet mask, gateway address,
primary DNS address and secondary DNS address for the phone manually. 

PPPoE: If you are using an xDSL modem, you can connect your phone to
the Internet via PPPoE mode. Contact the ITSP for the PPPoE user name
and password. 

Note: The wrong network settings may result in inaccessibility of your
phone and may have an impact on the network performance. Contact your
system administrator for more information. 

=head3 Account Settings 

Click on Account->Register->Account X (X=1,2) Parameters of the
account: 

Register Status: It shows the register status of the current account. 

Line Active: You can select Enabled/Disabled to enable/disable the
account. 

Label: It is shown on the LCD to identify the account. 

Display Name: It is shown as caller ID when placing a call. 

User Name: enter your Account Id here 

Register Name: enter your Account Id here 

Password: enter your PIN code here 

Server Host: sip.diamondcard.us 

=head3 Other issues 

If you have any other troubles using Yealink phone with Diamondcard
service please fill "bug report" form in your L<administration
center|https://www.diamondcard.us/login>. 

X<SIP Yealink> 

Tags for this page:   sip   yealink

---